SMC Networks TigerSwitch 100 manual Speed-duplex, Syntax Description string no description

COMMAND LINE INTERFACE

Console(config)#interface ethernet 1/25

Console(config-if)#

description

Use this command to add a description to an interface. Use the no form to remove the description.

Syntax

description string no description

string - Comment or a description to help you remember what is attached to this interface. (Range: 1-64 characters)

Default Setting

None

Command Mode

Interface Configuration (Ethernet, Port Channel)

Example

The following example adds a description to Ethernet port 15.

Console(config)#interface ethernet 1/15

Console(config-if)#description RD-SW#3

Console(config-if)#

speed-duplex

Use this command to configure the speed and duplex mode of a given interface when autonegotiation is disabled. Use the no form to restore the default.

Syntax

speed-duplex {1000full 100full 100half 10full 10half} no speed-duplex

3-86