SMC Networks TigerSwitch 100 manual Switchport priority default, 151

PRIORITY COMMANDS

Command	Function	Mode	Page
Layer 3 and 4 Priority	Commands
map ip precedence	Enables IP precedence class of service	GC	3-156
	mapping
map ip precedence	Maps IP precedence value to a class of	IC	3-157
	service
map ip dscp	Enables IP DSCP class of service mapping	GC	3-158
map ip dscp	Maps IP DSCP value to a class of service	IC	3-159
show map ip	Shows the IP precedence map	PE	3-160
precedence
show map ip dscp	Shows the IP DSCP map	PE	3-161

switchport priority default

Use this command to set a priority for incoming untagged frames, or the priority of frames received by the device connected to the specified interface. Use the no form to restore the default value.

Syntax

switchport priority default default-priority-idno switchport priority default

default-priority-id- The priority number for untagged ingress traffic. The priority is a number from 0 to 7. Seven is the highest priority.

Default Setting

The priority is not set, and the default value for untagged frames received on the interface is zero.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•The precedence for priority mapping is IP Precedence or IP DSCP, and default switchport priority.

3-151