SMC Networks TigerSwitch 100 manual Following example shows how to download a configuration file

COMMAND LINE INTERFACE

•To replace the startup configuration, you must use startup-config as the destination.

•The Boot ROM image cannot be uploaded or downloaded from the TFTP server. You must use a direct console connection and access the download menu during a boot up to download the Boot ROM (or diagnostic) image. See “Upgrading Firmware via the Serial Port” on page B-1 for more details.

Example

The following example shows how to upload the configuration settings to a file on the TFTP server:

Console#copy file tftp

Choose file type:

1.config: 2. opcode: <1-2>: 1 Source file name: startup

TFTP server ip address: 10.1.0.99

Destination file name: startup.01

/

Console#

The following example shows how to copy the running configuration to a startup file.

Console#copy running-config file destination file name : startup

/

Console#

The following example shows how to download a configuration file:

Console#copy tftp startup-config TFTP server ip address: 10.1.0.99

Source configuration file name: startup.01 Startup configuration file name [startup]:

/

Console#

3-20