SMC Networks TigerSwitch 100 manual Command Groups, Command Description Group

COMMAND LINE INTERFACE

Command Groups

The system commands can be broken down into the functional groups shown below.

Command	Description	Page
Group
General	Basic commands for entering privileged access mode,	3-12
	restarting the system, or quitting the CLI
Flash/File	Manages code image or switch configuration files	3-18
System	Controls system logs, system passwords, user name,	3-25
Management	jumbo frame support, browser management options,
	HTTPS, SSH, and a variety of other system
	information
Authentication	Configures RADIUS and TACACS+ client-server	3-50
	authentication for logon access
SNMP	Activates authentication failure traps; configures	3-58
	community access strings, and trap managers
IP	Configures the IP address and gateway for	3-67
	management access, displays the default gateway, or
	pings a specified device
Line	Sets communication parameters for the serial port,	3-73
	including baud rate and console time-out.
Interface	Configures the connection parameters for all	3-84
	Ethernet ports, aggregated links, and VLANs
Address Table	Configures the address table for filtering specified	3-100
	addresses, displaying current entries, clearing the
	table, or setting the aging time
Spanning Tree	Configures Spanning Tree settings for the switch	3-105
VLAN	Configures VLAN settings, and defines port	3-121
	membership for VLAN groups
GVRP and	Configures GVRP settings that permit automatic	3-132
Bridge Extension	VLAN learning; shows the configuration for bridge
	extension MIB

3-10