SMC Networks TigerSwitch 100 manual Vlan Commands, 121

VLAN COMMANDS

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Command	Function	Mode	Page
Edit VLAN Groups
vlan database	Enters VLAN database mode to add,	GC	3-122
	change, and delete VLANs
vlan	Configures a VLAN, including VID,	VC	3-123
	name and state
Configure VLAN Interfaces
interface vlan	Enters interface configuration mode for	IC	3-124
	specified VLAN
switchport mode	Configures VLAN membership mode	IC	3-125
	for an interface
switchport	Configures frame types to be accepted by	IC	3-126
acceptable-frame-types	an interface
swicthport	Enables ingress filtering on an interface	IC	3-127
ingress-filtering
switchport native vlan	Configures the PVID (native VLAN) of	IC	3-128
	an interface
switchport allowed vlan	Configures the VLANs associated with	IC	3-129
	an interface
switchport gvrp	Enables GVRP for an interface	IC	3-132
switchport forbidden	Configures forbidden VLANs for an	IC	3-130
vlan	interface

3-121