SMC Networks TigerSwitch 100 manual Disable, Example, Related Commands

GENERAL COMMANDS

Command Usage

•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 3-29.)

•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.

•You only need to use Level 15. Setting the password for Level 0 has no effect.

•You cannot set a null password with the enable password command. You will have to enter a password to access the Privileged Exec mode.

Example

Console#enable

Console#

Related Commands

disable (3-13)

enable password (3-29)

disable

Use this command to return to Normal Exec mode from privileged mode. In normal access mode, you can only display basic information on the switch's configuration or Ethernet statistics. To gain access to all commands, you must use the privileged mode. See “Understanding Command Modes” on page 3-6.

Default Setting

None

Command Mode

Privileged Exec

3-13