SMC Networks TigerSwitch 100 manual Event Logging Commands

COMMAND LINE INTERFACE

Command	Function	Mode	Page
show ip ssh	Displays the status of the SSH server and the	PE	3-37
	configured values for authentication timeout
	and retries
show ssh	Displays the status of current SSH sessions	PE	3-37
Event Logging Commands
logging on	Controls logging of error messages	GC	3-38
logging history	Limits syslog messages sent to the SNMP	GC	3-39
	network management station based on
	severity
logging host	Adds a syslog server host IP address that will	GC	3-40
	receive logging messages
logging facility	Sets the facility type for remote logging of	GC	3-41
	syslog messages
logging trap	Limits syslog messages saved to a remote	GC	3-42
	server based on severity
clear logging	Clears messages from the logging buffer	PE	3-43
show logging	Displays the state of logging	PE	3-43
System Status Commands
show	Displays the contents of the configuration file	PE	3-44
startup-config	(stored in Flash memory) that is used to start
	up the system
show	Displays the configuration data currently in	PE	3-46
running-config	use
show system	Displays system information	NE,	3-47
		PE
show users	Shows all active console and Telnet sessions,	NE,	3-48
	including user name, idle time, and IP address	PE
	of Telnet client
show version	Displays version information for the system	NE,	3-49
		PE

3-26