Manuals / Emulex / Computer Equipment / Network Card

Emulex manual Enabling and Disabling the Start Unit Command, NetWin 110 HBA User’s Guide, Page

Models: 110

1 37

Download 37 pages 29.49 Kb

Page 24

3.9.Enabling and Disabling the Start Unit Command

To enable or disable EDD 3.0, do the following:

1.Start the BIOS utility (see section 3.1, Starting the BIOS Utility, on page 3-1.) and select the desired HBA. Press 2 to configure the adapter.

2.Press 7 (Enable or Disable EDD 3.0). The screen to the right is displayed.

3.Press 1 to enable EDD 3.0, or press 2 to disable it.

4.Press x to exit the BIOS utility and reboot the system.

3.9.Enabling and Disabling the Start Unit Command

This command is used to issue the SCSI Start Unit Command. You must know the specific LUN to issue the SCSI Start Unit Command.

The default setting is disabled.

To enable or disable the start unit command, do the following:

1.Start the BIOS utility (see section 3.1, Starting the BIOS Utility, on page 3-1.) and select the desired HBA. Press 2 to configure the adapter.

2.Press 8 (Enable or Disable Start Unit Command). The screen to the right is displayed.

3.Press 1 to enable the Start Unit Command, or press 2 to disable it.

4.Press x to exit the BIOS utility and reboot the system.

3.10. Enabling and Disabling the Environment Variable

This option allows you to set the boot controller order if the system supports the environment variable.

The default setting is disabled.

To enable or disable the environment variable, do the following:

1.Start the BIOS utility (see section 3.1, Starting the BIOS Utility, on page 3-1.) and select the desired HBA. Press 2 to configure the adapter.

2.Press 9 (Enable or Disable Environment Variable). The screen to the right is displayed.

3.Press 1 to enable the Environment Variable, or 2 to disable it.

4.Press x to exit the BIOS utility and reboot the system.

NetWin 110 HBA User’s Guide

Page 3-5

Image 24

Emulex 110 manual Enabling and Disabling the Start Unit Command, Enabling and Disabling the Environment Variable, Page

Contents

NetWin 110 HBA User’s GuideNetWin 110 HBA User’s Guide Page1. Using the AutoPilot Manager Utility NetWin 110 HBA User’s Guide Cannot See New LUNs WindowsHBA Status LEDs PageOverview NetWin 110 HBA User’s Guide1. Using the AutoPilot Manager Utility 1.1. Starting the AutoPilot Manager Utility2. Click Programs 4. Select AutoPilot Manager1.2. AutoPilot Manager Utility Elements 1.2.1. Menu Bar1.2.2. Toolbar NetWin 110 HBA User’s Guide1.2.3. Discovery Tree 1.2.4. Property Windows and Property Pages1.2.5. Status Bar NetWin 110 HBA User’s Guide1.3. Discovering SAN Elements 1.3.1. Modifying Discovery Properties2. Click Defaults NetWin 110 HBA User’s Guide1.3.2. Viewing the Discovery Summary Page 1.3.3. Viewing Host InformationNetWin 110 HBA User’s Guide Page1.4. Managing Host Bus Adapters 1.4.1. Sorting HBAsNetWin 110 HBA User’s Guide Page1.4.2. Resetting an HBA 1.4.4. Reverting to an HBA’s Default Name1.4.3. Editing an HBA’s Name NetWin 110 HBA User’s Guide1.4.5. Viewing an HBA’s General Information NetWin 110 HBA User’s GuidePage 1.4.6. Viewing Fabric Information 1.4.7. Viewing Target InformationNetWin 110 HBA User’s Guide Page1.5. Advanced Mode Operation 1.5.1. Upgrading Firmware and Enabling x86 BootBIOS1.4.8. Viewing LUN Information NetWin 110 HBA User’s GuideEnabling or Disabling x86 BootBIOS Updating FirmwareNetWin 110 HBA User’s Guide Page1.5.2. Mapping Targets and Editing Persistent Bindings Changing Current SettingsAuto-Persistent Binding Current MappingsPersistent Binding Configuration 3. Click Remove AllNetWin 110 HBA User’s Guide Page2. Updating Drivers 2.1. Updating a Driver for WindowsNetWin 110 HBA User’s Guide Page3. BIOS Utility Configuration Guide 3.1. Starting the BIOS UtilityNetWin 110 HBA User’s Guide Page3.2. Enabling the BIOS on an HBA 3.3. Changing the Default ALPA3.4. Changing the PLOGI Retry Timer NetWin 110 HBA User’s Guide3.6. Enabling and Disabling the Spinup Delay 3.5. Changing the TopologyNetWin 110 HBA User’s Guide Page3.7. Setting Auto Scan 3.8. Enabling and Disabling EDDNetWin 110 HBA User’s Guide Page3.9. Enabling and Disabling the Start Unit Command 3.10. Enabling and Disabling the Environment VariableNetWin 110 HBA User’s Guide Page3.11. Enabling and Disabling Auto Sector Format Select NetWin 110 HBA User’s GuidePage 4. Configuring an Installed Drive As a Boot Device NetWin 110 HBA User’s GuidePage 7. Select an entry. Another window displays the following options NetWin 110 HBA User’s GuidePage 5. Installing Windows on a New Boot Device NetWin 110 HBA User’s GuidePage 11. Insert the NetWin 110 Installation CD into the system’s CD drive. The Launch It! dialog box appears. Click Launch AutoPilot HBA Installation Program and follow the prompts NetWin 110 HBA User’s GuidePage 6. Using a Microsoft Cluster Server NetWin 110 HBA User’s GuidePage Page B.1. Specifications B.2. Laser Safety NoticeB. Hardware Reference Certification and ClassificationLabeling Requirements Product Information GLMGBIC NetWin 110 HBA User’s GuideSmall Form Factor Transceiver 1x9 TransceiverUsage Restrictions GBIC1x9 Transceiver Small Form Factor TransceiverSystem Level Certification NetWin 110 HBA User’s GuideC. Troubleshooting C.1. SCSIport Miniport Driver Does Not See TargetsC.2. The AutoPilot Manager Utility Cannot See Other HBAs or Hosts C.3. Cannot See New LUNs WindowsC.4. HBA Status LEDs NetWin 110 HBA User’s GuidePage C-2 Yellow LED