Emulex 110 manual Using the AutoPilot Manager Utility

Overview	v
1. Using the AutoPilot Manager Utility	1-1
1.1. Starting the AutoPilot Manager Utility	1-1
1.2. AutoPilot Manager Utility Elements	1-2
1.2.1. Menu Bar	1-2
1.2.2. Toolbar	1-2
1.2.3. Discovery Tree	1-3
1.2.4. Property Windows and Property Pages	1-3
1.2.5. Status Bar	1-3
1.3. Discovering SAN Elements	1-4
1.3.1. Modifying Discovery Properties	1-4
1.3.2. Viewing the Discovery Summary Page	1-5
1.3.3. Viewing Host Information	1-5
1.4. Managing Host Bus Adapters	1-6
1.4.1. Sorting HBAs	1-6
1.4.2. Resetting an HBA	1-7
1.4.3. Editing an HBA’s Name	1-7
1.4.4. Reverting to an HBA’s Default Name	1-7
1.4.5. Viewing an HBA’s General Information	1-8
1.4.6. Viewing Fabric Information	1-9
1.4.7. Viewing Target Information	1-9
1.4.8. Viewing LUN Information	1-10
1.5. Advanced Mode Operation	1-10
1.5.1. Upgrading Firmware and Enabling x86 BootBIOS	1-10
1.5.2. Mapping Targets and Editing Persistent Bindings	1-12
2. Updating Drivers	2-1
2.1. Updating a Driver for Windows	2-1
3. BIOS Utility Configuration Guide	3-1
3.1. Starting the BIOS Utility	3-1
3.2. Enabling the BIOS on an HBA	3-2
3.3. Changing the Default AL_PA	3-2
3.4. Changing the PLOGI Retry Timer	3-2
3.5. Changing the Topology	3-3
3.6. Enabling and Disabling the Spinup Delay	3-3
3.7. Setting Auto Scan	3-4
3.8. Enabling and Disabling EDD 3.0	3-4
3.9. Enabling and Disabling the Start Unit Command	3-5
3.10. Enabling and Disabling the Environment Variable	3-5
3.11. Enabling and Disabling Auto Sector Format Select	3-6
4. Configuring an Installed Drive As a Boot Device	4-1
5. Installing Windows on a New Boot Device	5-1
6. Using a Microsoft Cluster Server	6-1
A. Installing the Low-Profile Bracket	A-1
B. Hardware Reference	B-1
B.1. Specifications	B-1
B.2. Laser Safety Notice	B-1
C. Troubleshooting	C-1
C.1. SCSIport Miniport Driver Does Not See Targets	C-1
C.2. The AutoPilot Manager Utility Cannot See Other HBAs or Hosts	C-1

NetWin 110 HBA User’s Guide Page iii