MIRROR PORT COMMANDS

Default Setting

Shows all sessions.

Command Mode

Privileged Exec

Command Usage

This command displays the currently configured source port, destination port, and mirror mode (i.e., RX, TX, RX/TX).

Example

The following shows mirroring configured from port 6 to port 11:

Console(config)#interface ethernet 1/11 Console(config-if)#port monitor ethernet 1/6 Console(config-if)#end

Console#show port monitor Port Mirroring

-------------------------------------

Destination port(listen port):Eth1/1

Source port(monitored port)

:Eth1/6

Mode

:RX/TX

Console#

 

Related Commands

port monitor (3-163)

3-165

Page 309
Image 309
SMC Networks TigerSwitch 100 manual 165, Following shows mirroring configured from port 6 to port