SMC Networks TigerSwitch 100 manual Snmp-server host

SNMP COMMANDS

Default Setting

None

Command Mode

Global Configuration

Example

Console(config)#snmp-server location WC-19

Console(config)#

Related Commands

snmp-server contact (3-60)

snmp-server host

Use this command to specify the recipient of a Simple Network Management Protocol notification operation. Use the no form to remove the specified host.

Syntax

snmp-server host {host-addrcommunity-string} [version 1 2c] no snmp-server host host-addr

•host-addr- Name or Internet address of the host (the targeted recipient). (Maximum host addresses: 5 trap destination IP address entries)

•community-string- Password-like community string sent with the notification operation. Though you can set this string using the snmp-server host command by itself, we recommend you define this string using the snmp-server community command prior to using the snmp-server host command. (Maximum length:

32 characters)

•version - Specifies whether to send notifications as SNMP v1 or SNMP v2c traps.

3-61