COMMAND LINE INTERFACE
Example
Console#show ip ssh
Information of secure shell
SSH status: enable
SSH authentication timeout: 120
SSH authentication retries: 3
Console#
Related Commands
ip ssh
logging on
Use this command to control logging of error messages. This command sends debug or error messages to a logging process. The no form disables the logging process.
Syntax
logging on no logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory or sent to remote syslog servers. You can use the logging history command to control the type of error messages that are stored in memory. The logging trap command controls the type of error messages that are sent to specified syslog servers.
Example
Console(config)#logging on
Console(config)#
