SMC Networks TigerSwitch 100 manual Clear mac-address-table dynamic, Mac-address-table aging-time

ADDRESS TABLE COMMANDS

-Delete-on-reset - static entry to be deleted when system is reset

•The mask should be hexadecimal numbers (representing an equivalent bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified MAC address. Enter hexadecimal numbers, where an equivalent binary bit “0” means to match a bit and “1” means to ignore a bit. For example, a mask of 00-00-00-00-00-00 means an exact match, and a mask of FF-FF-FF-FF-FF-FF means “any.”

•The maximum number of address entries is 8191.

Example

Console#show mac-address-table
Interface	Mac Address	Vlan	Type
---------	----------------- ----		-----------------
Eth 1/ 1	00-e0-29-94-34-de	1	Delete-on-reset
Console#

clear mac-address-table dynamic

Use this command to remove any learned entries from the forwarding database and to clear the transmit and receive counts for any static or system configured entries.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#clear mac-address-table dynamic

Console#

mac-address-table aging-time

Use this command to set the aging time for entries in the address table. Use the no form to restore the default aging time.

3-103