SMC Networks TigerSwitch 100 manual Syntax Password-thresh threshold no password-thresh

COMMAND LINE INTERFACE

Default Setting

CLI: No timeout

Telnet: 10 minutes

Command Mode

Line Configuration

Command Usage

•If input is detected, the system resumes the current connection; or if no connections exist, it returns the terminal to the idle state and disconnects the incoming session.

•This command applies to both the local console and Telnet connections.

•The timeout for Telnet cannot be disabled.

Example

To set the timeout to two minutes, enter this command:

Console(config-line)#exec-timeout 120

Console(config-line)#

password-thresh

Use this command to set the password intrusion threshold which limits the number of failed logon attempts. Use the no form to remove the threshold value.

Syntax

password-thresh threshold no password-thresh

threshold - The number of allowed password attempts. (Range: 1-120; 0: no threshold)

Default Setting

The default value is three attempts.

3-78