
UPGRADING FIRMWARE VIA THE SERIAL PORT
Select>
Xmodem Receiving Start ::
Image downloaded to buffer.
[R]untime
[D]iagnostic
[L]oader (Warning: you sure what you are doing?) Update Image File:r
Diagnostic Image Filename : r_20019 Updating file system.
File system updated.
[Press any key to continue]
12.To set the new downloaded file as the startup file, use the [S]et Startup File menu option.
13.When you have finished downloading code files, use the [C]hange Baudrate menu option to change the baud rate of the switch’s serial connection back to 9600 baud.
14.Set your PC’s terminal emulation software baud rate back to 9600 baud. Press <Enter> to reset communications with the switch.
15.Press <Q> to quit the