MULTICAST CONFIGURATION
•VLAN ID – Selects the VLAN to propagate all multicast traffic coming from the attached multicast router/switch.
•Port or Trunk – Specifies the interface attached to a multicast router.
Web – Click IGMP, Static Multicast Router Port Configuration. Specify the interfaces attached to a multicast router, indicate the VLAN which will forward all the corresponding multicast traffic, and then click Add. After you have completed adding interfaces to the list, click Apply.
CLI – This example configures port 11 as a multicast router port within VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console#show ip igmp snooping mrouter vlan 13-149VLAN M'cast Router Port Type
----
1Eth 1/11 Static
Displaying Port Members of Multicast Services
You can display the port members associated with a specified VLAN and multicast IP address.
Command Attribute
•VLAN ID – Selects the VLAN in which to display port members.
