SMC Networks TigerSwitch 100 manual FLASH/FILE Commands

FLASH/FILE COMMANDS

system operation. The success of the file transfer depends on the accessibility of the TFTP server and the quality of the network connection.

Syntax

copy file {file running-config startup-config tftp} copy running-config {file startup-config tftp} copy startup-config {file running-config tftp} copy tftp {file running-config startup-config https-certificate}

•file - Keyword that allows you to copy to/from a file.

•running-config- Keyword that allows you to copy to/from the current running configuration.

•startup-config- The configuration used for system initialization.

•tftp - Keyword that allows you to copy to/from a TFTP server.

•https-certificate- Copies an HTTPS certificate from an TFTP server to the switch.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•The system prompts for data required to complete the copy command.

•The file names are case sensitive. The destination file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum length for file names on the TFTP server is 127 characters or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•The number of user-defined configuration files is limited only by available Flash memory space.

•You can use “Factory_Default_Config.cfg” as the source to copy from the factory default configuration file, but you cannot use “Factory_Default_Config.cfg” as the destination.

3-19