
COMMAND LINE INTERFACE
•ethernet unit/port
-unit - This is device 1.
-port - Port number.
•port-channel channel-id (Range: 1-6)
•vlan
Default Setting
None (For a description of the items displayed by this command, see “Displaying Connection Status” on page
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a description of the items displayed by this command, see “Displaying Connection Status” on page
Example
Console#show interface status ethernet 1/5 Information of Eth 1/5
Basic information:
Port type: 1000T
Mac address:
Name:
Port admin: Up
Capabilities: 10half, 10full, 100half, 100full, 1000full,
Broadcast storm: Enabled
Broadcast storm limit: 256 packets/second
Flow control: Disabled
Lacp: Disabled
Port security: Disabled
Port security action: None Current status:
Link status: Up
Port operation status: Up
Operation
Flow control type: None Console#