SMC Networks TigerSwitch 100 manual Spanning Tree Commands, Command Function

SPANNING TREE COMMANDS

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Protocol (STP) for the overall switch, and commands that configure STP for the selected interface.

Command	Function	Mode	Page
spanning-tree	Enables the spanning tree protocol	GC	3-106
spanning-tree	Configures STP or RSTP mode	GC	3-107
mode
spanning-tree	Configures the spanning tree bridge forward	GC	3-108
forward-time	time
spanning-tree	Configures the spanning tree bridge hello	GC	3-109
hello-time	time
spanning-tree	Configures the spanning tree bridge	GC	3-109
max-age	maximum age
spanning-tree	Configures the spanning tree bridge priority	GC	3-110
priority
spanning-tree	Configures the path cost method for RSTP	GC	3-111
path-cost method
spanning-tree	Configures the transmission limit for RSTP	GC	3-112
transmission-limit
spanning-tree cost	Configures the spanning tree path cost of an	IC	3-113
	interface
spanning-tree port	Configures the spanning tree priority of an	IC	3-114
priority	interface
spanning-tree	Sets an interface to fast forwarding	IC	3-115
portfast
spanning-tree	Enables fast forwarding for edge ports	IC	3-116
edge-port
spanning-tree	Re-checks the appropriate BPDU format	PE	3-117
protocol-migration
spanning-tree	Configures the link type for RSTP	IC	3-118
link-type
show spanning-tree	Shows the Spanning Tree configuration	PE	3-119

3-105