SMC Networks TigerSwitch 100 manual Showing Device Statistics, 108

CONFIGURING THE SWITCH

Web – Click IGMP, IGMP Member Port Table. Specify the interface attached to a multicast service (via an IGMP-enabled switch or multicast router), indicate the VLAN that will propagate the multicast service, specify the multicast IP address, and then click Add. After you have completed adding ports to the member list, click Apply.

CLI – This example assigns a multicast address to VLAN 1, and then displays all the known multicast services supported on VLAN 1.

Console(config)#ip igmp snooping vlan 1 static 224.0.0.12
ethernet 1/12				3-140
Console(config)#exit
Console#show mac-address-table multicast vlan 1				3-142
VLAN	M'cast IP addr. Member ports		Type
----	--------------- ------------		-------
1	224.0.0.12	Eth1/12	USER
1	224.1.2.3	Eth1/12	IGMP

Console#

Showing Device Statistics

You can display standard statistics on network traffic from the Interfaces Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic based on the RMOM MIB. Interfaces and Ethernet-like statistics display errors on the traffic passing through each port. This information can be used to identify potential problems with the switch (such as a faulty port or

2-108