SMC Networks TigerSwitch 100 manual General Commands, Syntax Enable level, Default Setting

COMMAND LINE INTERFACE

General Commands

Command	Function	Mode	Page
enable	Activates privileged mode	NE	3-12
disable	Returns to normal mode from privileged mode	PE	3-13
configure	Activates global configuration mode	PE	3-14
reload	Restarts the system	PE	3-16
end	Returns to Privileged Exec mode	GC, IC,	3-16
		LC, VC
exit	Returns to the previous configuration mode, or	any	3-17
	exits the CLI
quit	Exits a CLI session	NE, PE	3-17
help	Shows how to use help	any	NA
?	Shows options for command completion	any	NA
	(context sensitive)

enable

Use this command to activate Privileged Exec mode. In privileged mode, additional commands are available, and certain commands display additional information. See “Understanding Command Modes” on page 3-6.

Syntax

enable [level]

level - Privilege level to log into the device.

The device has two predefined privilege levels: 0: Normal Exec,

15: Privileged Exec. Enter level 15 to access Privileged Exec mode.

Default Setting

Level 15

Command Mode

Normal Exec

3-12