C
ONFIGURING
THE
S
WITCH
2-32
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pa ges to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Command Attributes
Name – Interface label.
Type – Indicates the of port type (1000Base-TX or 1000Base-SFP).
Admin Status – Shows if the interface is enabled or disabled.
Oper Status – Indicates if the link is Up or Down.
Speed/Duplex Status – Shows the current speed and duplex mode.
Flow Control Status – Indicates the type of flow control currently in
use.
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
Trunk Member – Shows if port is a trunk member. (Port Information
only.)
Creation – Shows if a trunk is manually configured or dynamically set
via LACP. (Trunk Information only.)