CONFIGURING THE SWITCH
CLI – Enter the IP address of the TFTP server, specify the source file on the server, and set the startup file name on the switch. If you download the startup configuration file under a new file name, you can set this file as the startup file at a later time, and then restart the switch.
Console#copy tftp | |
TFTP server ip address: 192.168.1.19 |
|
Source configuration file name: startup2.0 |
|
Startup configuration file name [startup] : startup2.0 |
|
\Write to FLASH Programming. |
|
| |
Success. |
|
Console#config |
|
Console(config)#boot system config: startup2.0 | |
Console(config)#exit |
|
Console#reload |
|
|
|
Copying the Running Configuration to a File
You can save the current running configuration to a new file name and then set it as the startup file. Enter a name for the new configuration file, and then click Copy to File.
