SWITCH MANAGEMENT
4.To set the IP address of the default gateway for the network to which the switch belongs, type “ip
Console(config)#interface vlan 1
Console(config)#ip
Console(config)#
Dynamic Configuration
If you select the “bootp” or “dhcp” option, IP will be enabled but will not function until a BOOTP or DHCP reply has been received. You therefore need to use the “ip dhcp restart” command to start broadcasting service requests. Requests will be sent periodically in an effort to obtain IP configuration information. (BOOTP and DHCP values can include the IP address, subnet mask, and default gateway.)
If the “bootp” or “dhcp” option is saved to the
To automatically configure the switch by communicating with BOOTP or DHCP address allocation servers on the network, complete the following steps:
1.From the Privileged Exec level global configuration mode prompt, type “interface vlan 1” to access the
2.At the
•To obtain IP settings through DHCP, type “ip address dhcp” and press <Enter>.
•To obtain IP settings through BOOTP, type “ip address bootp” and press <Enter>.
