SMC Networks TigerSwitch 100 manual Ip igmp snooping router-port-expire-time, 147

IGMP SNOOPING COMMANDS

ip igmp snooping router-port-expire-time

Use this command to configure the snooping router-port-expire-time. Use the no form of this command to restore the default.

Syntax

ip igmp snooping router-port-expire-time seconds no ip igmp snooping router-port-expire-time

seconds - The time the switch waits after the previous querier stops before it considers the router port (i.e., the interface which had been receiving query packets) to have expired.

(Range: 300-500)

Default Setting

300 seconds

Command Mode

Global Configuration

Command Usage

The switch must be using IGMPv2 for this command to take effect.

Example

The following shows how to configure the default timeout to 300 seconds:

Console(config)#ip igmp snooping query-time-out 300

Console(config)#

Related Commands

ip igmp snooping version (3-141)

3-147