SMC Networks TigerSwitch 100 manual Saving or Restoring Configuration Settings

CONFIGURING THE SWITCH

To start the new firmware, reboot the system.

CLI – Enter the IP address of the TFTP server, select config or opcode file type, then enter the source and destination file names, set the new file to start up the system, and then restart the switch.

Console#copy tftp file		3-18
TFTP server	ip address: 10.1.0.99
Choose file	type:
1. config:	2. opcode: <1-2>: 2
Source file	name: v10.bix
Destination	file name: V10000
/
Console#config
Console(config)#boot system opcode: V10000		3-24
Console(config)#exit
Console#reload		3-16

Saving or Restoring Configuration Settings

You can upload/download configuration settings to/from a TFTP server. The configuration file can be later downloaded to restore the switch’s settings.

Command Attributes

•TFTP Server IP Address – The IP address of a TFTP server.

•Destination File Name — File names are case-sensitive. The file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum length for file

2-24