SMC Networks TigerSwitch 100 manual Flash/File Commands, Copy

COMMAND LINE INTERFACE

Command Mode

Normal Exec, Privileged Exec

Command Usage

The quit and exit commands can both exit the configuration program.

Example

This example shows how to quit a CLI session:

Console#quit

Press ENTER to start session

User Access Verification

Username:

Flash/File Commands

These commands are used to manage system code and configuration files.

Command	Function	Mode	Page
copy	Copies a code image or a switch configuration	PE	3-18
	to or from Flash memory or a TFTP server
delete	Deletes a file or code image	PE	3-21
dir	Displays a list of files in Flash memory	PE	3-22
whichboot	Displays the files booted	PE	3-23
boot system	Specifies the file or image used to start up the	GC	3-24
	system

copy

Use this command to move (upload/download) a code image or configuration file between the switch’s Flash memory and a TFTP server. When you save the system code or configuration settings to a file on a TFTP server, that file can later be downloaded to the switch to restore

3-18