CONFIGURING SNMP
Web – Click SNMP, SNMP Configuration. Fill in the Trap Manager IP Address box and the Trap Manager Community String box, mark Enable Authentication Traps if required, and then click Add.
CLI – This example adds a trap manager and enables authentication traps.
host 10.1.19.23 batman | ||
enable traps authentication | ||
|
|
|
SNMP IP Filtering
The switch allows you to create a list of up to 16 IP addresses or IP address groups that are allowed access to the switch via SNMP management software.
IP addresses that are permitted SNMP access are specified by an IP address together with a subnet mask that identifies the range of valid addresses. For example:
IP address 192.168.1.1 and mask 255.255.255.0 — Specifies a valid IP address group from 192.168.1.0 to 192.168.1.255.
