![](/images/new-backgrounds/1267480/267480203x1.webp)
CONFIGURING THE SWITCH
CLI – The following example shows how to add tagged and untagged ports to VLAN 2.
Console(config)#interface ethernet 1/1 | |
|
Console(config)#interface ethernet 1/13
Adding Interfaces Based on Static Membership
Use the VLAN Static Membership by Port menu to assign VLAN groups to the selected interface add an interface to the selected VLAN as a tagged member.
Command Attributes
•Interface – Port or trunk identifier.
•Member – VLANs for which the selected interface is a tagged member.
•