COMMAND LINE INTERFACE
garp timer
Use this command to set the values for the join, leave and leaveall timers. Use the no form to restore the timers’ default values.
Syntax
garp timer {join leave leaveall} timer_value no garp timer {join leave leaveall}
•{join leave leaveall} - Which timer to set.
•timer_value - Value of timer. Ranges:
join:
leave:
leaveall:
Default Setting
•join: 20 centiseconds
•leave: 60 centiseconds
•leaveall: 1000 centiseconds
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
•Group Address Registration Protocol is used by GVRP and GMRP to register or deregister client attributes for client services within a bridged LAN. The default values for the GARP timers are independent of the media access method or data rate. These values should not be changed unless you are experiencing difficulties with GMRP or GVRP registration/deregistration.
•Timer values are applied to GVRP for all the ports on all VLANs.
•Timer values must meet the following restrictions: leave >= (2 x join)
leaveall > leave
