SMC Networks TigerSwitch 100 manual Spanning-tree protocol-migration, 117

SPANNING TREE COMMANDS

Related Commands

spanning-tree portfast (3-115)

spanning-tree protocol-migration

Use this command to re-check the appropriate BPDU format to send on the selected interface.

Syntax

spanning-tree protocol-migration interface

interface

•ethernet unit/port-number

-unit - This is device 1.

-port-number

•port-channel channel-id(Range: 1-6)

Command Mode

Privileged Exec

Command Usage

If at any time the switch detects STP BPDUs, including Configuration or Topology Change Notification BPDUs, it will automatically set the selected interface to forced STP-compatible mode. However, you can also use the spanning-treeprotocol-migrationcommand at any time to manually re-check the appropriate BPDU format to send on the selected interfaces (i.e., RSTP or STP-compatible).

Example

Console(config)#interface ethernet 1/5

Console(config-if)#spanning-tree protocol-migration

Console(config-if)#

3-117