PRIORITY COMMANDS
Example
The following example shows how to enable IP precedence mapping globally:
Console(config)#map ip precedence
Console(config)#
map ip precedence (Interface Configuration)
Use this command to set IP precedence priority (i.e., IP Type of Service priority). Use the no form to restore the default table.
Syntax
map ip precedence
•
•
Default Setting
The list below shows the default priority mapping.
IP Precedence Value | CoS Value |
0 | 0 |
|
|
1 | 1 |
|
|
2 | 2 |
|
|
3 | 3 |
|
|
4 | 4 |
|
|
5 | 5 |
|
|
6 | 6 |
|
|
7 | 7 |
|
|
Command Mode
Interface Configuration (Ethernet, Port Channel)
