SMC Networks TigerSwitch 100 manual 131, Syntax Show vlan id vlan-idname vlan-name

VLAN COMMANDS

Example

The following example shows how to prevent port 1 from being added to VLAN 3:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport forbidden vlan add 3

Console(config-if)#

show vlan

Use this command to show VLAN information.

Syntax

show vlan [id vlan-idname vlan-name]

•id - Keyword to be followed by the VLAN ID.

-vlan-id- ID of the configured VLAN. (Range: 1-4094, no leading zeroes)

•name - Keyword to be followed by the VLAN name.

-vlan-name- ASCII string from 1 to 32 characters.

Default Setting

Shows all VLANs.

Command Mode

Normal Exec, Privileged Exec

Example

The following example shows how to display information for VLAN 1:

Console#show	vlan	id 1
VLAN Type	Name	Status	Ports/Channel groups

---- ------- ---------------- --------- ---------------------------------------

1 Static	DefaultVlan	Active Eth1/ 1 Eth1/ 2		Eth1/ 3	Eth1/	4	Eth1/ 5
		Eth1/ 6	Eth1/ 7	Eth1/ 8	Eth1/	9	Eth1/10
		Eth1/11 Eth1/12		Eth1/13	Eth1/14 Eth1/15
		Eth1/16 Eth1/17		Eth1/18	Eth1/19 Eth1/20
		Eth1/21 Eth1/22 Eth1/23 Eth1/24

Console#

3-131