Tripp Lite SU16000RT4UHW owner manual Storage, Service, Warranty Registration

Page 17

Storage

Before storing your UPS, turn it completely OFF. If you store your UPS for an extended period of time, recharge the UPS batteries for 4 to 6 hours once every three months. Note: after you connect the UPS to utility power, it will automatically begin charging its batteries. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Your SmartOnline UPS is covered by a 2-year limited warranty. A variety of Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For more information on service, call Tripp Lite Customer Support at (773) 869-1234.

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. They will also discuss proper packaging and shipping procedures. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

Warranty

2-YEAR LIMITED WARRANTY

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 2 years (except internal UPS system batteries outside USA and Canada, 1 year) from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA. Seller will pay return shipping charges. Call Tripp Lite Customer Service at (773) 869-1234 before sending any equipment back for repair.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

FCC Radio/TV Interference Notice:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Made in China.

Regulatory Compliance

Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234

17

Image 17
Contents SmartOnline Hot-Swappable Modular UPS Systems Important Safety Warnings Front Control Panel Power Module Detachable Power Distribution Unit PDU External Battery Pack with Detachable Power Cable Mounting Tower Mounting 4-Post RackmountAttach the PDU to the Power Module and Battery Pack Hardwiring CautionsHardwire the PDU to a Utility Power Source Connect the Battery Pack to the Power ModuleAdditional Battery Pack Connection Procedure Additional Battery Pack ConnectionUSB and Serial Communication Connection EPO Port ConnectionFailed Self-Test Startup Self-TestNormal Operation On Battery AlarmAdditional Self-Test Output Voltage SelectionBypass Messages Overload MessagesShutdown Shutdown MessagesTo reattach the PDU, reverse the process listed above UPS Power Module RemovalHigh Voltage Risk of electrical shock High Voltage WarningsWarranty ServiceWarranty Registration StorageManual del Propietario Instrucciones de Seguridad Importantes Controles en el Panel Frontal Mute Select SetupMódulo de Potencia Características continuaciónUnidad de Distribución de Energía PDU Desmontable Módulo de Baterías Externas con Cable Desprendible Montaje Torre Montaje Bastidor de 4 PostesEncienda el UPS Conecte el Módulo de Baterías al Módulo de PotenciaConexión del Puerto EPO Conexión de Comunicaciones USB y SerialConexión del Módulo de Baterías Adicional Procedimiento para conectar Módulos de Baterías AdicionalesAuto Prueba Fallida Auto Prueba de ArranqueOperación Normal Alarma de Modo de RespaldoAuto Prueba Adicional Selección del Voltaje de SalidaMensajes en Derivación Mensajes de Sobre CargaINT Charger Fail Mensajes de CierreRemoción del Modulo de Potencia del UPS Servicio Procedimiento de Derivación Manual continuaciónAlmacenaje Cumplimiento con las Normas de Números de Identificación Aviso de la FCC sobre la interferencia de Radio/TVManuel du propriétaire Importantes consignes de sécurité Setup Panneau de commandes avantModule dalimentation Caractéristiques suiteUnité de distribution dalimentation PDU amovible Bloc-batterie externe avec câble dalimentation amovible Montage en tour MontageMontage en bâti à 4 montants Fixer la PDU au module dalimentation et au bloc-batterie Avertissements pour le câblageCâbler la PDU à une source de courant de secteur Connecter le bloc-batterie au module dalimentationConnexions optionnelles Échec de lauto-test Auto-test de démarrageFonctionnement normal Alarme de batterieFonctionnement suite Autre auto-test Sélection de la tension de sortieMessages de dérivation Messages de surchargeMessages darrêt Dépose du module dalimentation de londuleur Haute tension Risque de choc électrique Procédure de dérivation manuelle suiteRéparations EntreposageAvis de la FCC sur les interférences radio et TV Conformité aux règlements Numéros didentification200807048

SU16000RT4U, SU16000RT4UHW specifications

The Tripp Lite SU16000RT4UHW is a high-capacity rack-mounted uninterruptible power supply (UPS) designed to provide reliable power protection for critical IT infrastructure. With a maximum output of 16,000 VA, this device is ideal for data centers, server rooms, and enterprise networks that demand continuous power and high performance. One of its standout features is its hybrid design, which allows for versatile installation in both rack and tower formats, making it suitable for various environments.

The SU16000RT4U offers advanced battery management technologies, ensuring long-lasting performance and efficiency. Its scalable architecture allows users to add additional battery packs for extended runtime, which is essential in situations where power outages can disrupt business operations. Equipped with smart features, it includes an LCD control panel that provides real-time information regarding battery status, load level, and other vital metrics, enabling users to monitor performance effortlessly.

Another significant characteristic of the SU16000RT4UHW is its compatibility with Tripp Lite's PowerAlert software. This software allows for advanced management of power conditions and remote monitoring via SNMP interface when paired with the optional SNMP/Web card. The UPS also includes a variety of outlets, including both NEMA and IEC standard configurations, catering to different equipment and ensuring adaptability.

Furthermore, this UPS is designed with enhanced protection features such as spike and surge suppression, which safeguards connected devices from electrical disturbances. The internal smart charging system also maximizes battery life by optimizing charging cycles based on usage patterns. This means that users can expect higher availability and a longer operational lifespan.

Constructed with durability in mind, Tripp Lite has included a fault-tolerant design that ensures uninterrupted power delivery even under extreme conditions. The SU16000RT4UHW's robust thermal management enhances cooling efficiency, contributing to reliable operation even in densely populated rack environments.

In conclusion, the Tripp Lite SU16000RT4UHW and its counterpart the SU16000RT4U are essential components for any organization that prioritizes reliable power management. With its high capacity, advanced features, and flexible configurations, it provides unmatched protection for critical IT equipment, ensuring business continuity in the face of electrical failures. Investing in such technology not only protects hardware but also secures data integrity and operational efficiency.