Tripp Lite SU16000RT4UHW owner manual Power Module

Page 4

Features (continued)

Power Module

This 4U module houses the UPS system's power and control components.

1

2

3

2

4

5

 

 

 

 

7

 

 

 

 

6

1External Battery Connector: Use this connector to attach one or more Tripp Lite external battery packs to the power module. Remove the retention bracket for access. The power module will not start without a connection to a charged, compatible battery pack. Check to ensure that the external battery pack you are connecting matches the voltage listed next to the battery connector. Small sparks may result during battery connection; this is normal. Do not connect or disconnect battery packs while the UPS is running on battery power (the “BATTERY” LED will be lit on the control panel). Warning: Always use the connector retention brackets to secure the battery pack connection (see the “Connection” section for instructions). Do not operate the UPS system without the connector retention brackets in place. Refer to the battery pack owner's manual for additional connection instructions and safety warnings.

2Ventilation Fans: These fans cool the interior of the power module.

3Input/Output Terminal Block: These terminals connect the power module to the detachable PDU.

Warning: Do not contact the live terminals.

4Battery Charge Level Switch: This switch controls the UPS system's battery charge rate. The switch is set to the left (the position labeled “NORMAL”) by default. If you connect more than one external battery pack to the UPS system, set the Battery Charge Level Switch to the right (the position labeled “HIGH”), allowing the additional batteries to charge faster. Warning: Setting the Battery Charge Level Switch to “HIGH” when only one battery pack is connected may damage the battery pack.

5Serial and USB Ports: These serial (RS-232 DB9) and USB ports enable optional connection of the UPS to corresponding ports on a workstation or server. When the UPS system is connected to a computer via the included serial or USB cable, Tripp Lite's PowerAlert Software can be used to monitor and control the UPS system. PowerAlert can also save files and shut down computers automatically during extended power failures. (See “Optional Connection” section for more information.)

6EPO Port: This port enables optional connection to a facility's EPO (Emergency Power Off) circuit for emergency shutdown of the UPS inverter. (See “Optional Connection” section for more information.) Do not connect a telephone line to this port.

7Accessory Slot: Remove the slot's cover to install an optional internal SNMP/Web accessory card (Model: SNMPWEBCARD) to enable remote UPS monitoring and control via SNMP, Web or telnet. Call (773) 869-1234 or go to www.tripplite.com to learn about available SNMP, network management and connectivity products.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SmartOnline Hot-Swappable Modular UPS Systems Important Safety Warnings Front Control Panel Power Module Detachable Power Distribution Unit PDU External Battery Pack with Detachable Power Cable Mounting 4-Post Rackmount Mounting TowerHardwiring Cautions Attach the PDU to the Power Module and Battery PackHardwire the PDU to a Utility Power Source Connect the Battery Pack to the Power ModuleAdditional Battery Pack Connection Additional Battery Pack Connection ProcedureUSB and Serial Communication Connection EPO Port ConnectionStartup Self-Test Failed Self-TestOn Battery Alarm Normal OperationOutput Voltage Selection Additional Self-TestOverload Messages Bypass MessagesShutdown Messages ShutdownUPS Power Module Removal To reattach the PDU, reverse the process listed aboveHigh Voltage Warnings High Voltage Risk of electrical shockService WarrantyWarranty Registration StorageManual del Propietario Instrucciones de Seguridad Importantes Mute Select Setup Controles en el Panel FrontalCaracterísticas continuación Módulo de PotenciaUnidad de Distribución de Energía PDU Desmontable Módulo de Baterías Externas con Cable Desprendible Montaje Bastidor de 4 Postes Montaje TorreConecte el Módulo de Baterías al Módulo de Potencia Encienda el UPSConexión de Comunicaciones USB y Serial Conexión del Puerto EPOConexión del Módulo de Baterías Adicional Procedimiento para conectar Módulos de Baterías AdicionalesAuto Prueba de Arranque Auto Prueba FallidaAlarma de Modo de Respaldo Operación NormalSelección del Voltaje de Salida Auto Prueba AdicionalMensajes de Sobre Carga Mensajes en DerivaciónMensajes de Cierre INT Charger FailRemoción del Modulo de Potencia del UPS Almacenaje Procedimiento de Derivación Manual continuaciónServicio Aviso de la FCC sobre la interferencia de Radio/TV Cumplimiento con las Normas de Números de IdentificaciónManuel du propriétaire Importantes consignes de sécurité Panneau de commandes avant SetupCaractéristiques suite Module dalimentationUnité de distribution dalimentation PDU amovible Bloc-batterie externe avec câble dalimentation amovible Montage en bâti à 4 montants MontageMontage en tour Avertissements pour le câblage Fixer la PDU au module dalimentation et au bloc-batterieCâbler la PDU à une source de courant de secteur Connecter le bloc-batterie au module dalimentationConnexions optionnelles Auto-test de démarrage Échec de lauto-testFonctionnement suite Alarme de batterieFonctionnement normal Sélection de la tension de sortie Autre auto-testMessages de surcharge Messages de dérivationMessages darrêt Dépose du module dalimentation de londuleur Procédure de dérivation manuelle suite Haute tension Risque de choc électriqueEntreposage RéparationsAvis de la FCC sur les interférences radio et TV Conformité aux règlements Numéros didentification200807048

SU16000RT4U, SU16000RT4UHW specifications

The Tripp Lite SU16000RT4UHW is a high-capacity rack-mounted uninterruptible power supply (UPS) designed to provide reliable power protection for critical IT infrastructure. With a maximum output of 16,000 VA, this device is ideal for data centers, server rooms, and enterprise networks that demand continuous power and high performance. One of its standout features is its hybrid design, which allows for versatile installation in both rack and tower formats, making it suitable for various environments.

The SU16000RT4U offers advanced battery management technologies, ensuring long-lasting performance and efficiency. Its scalable architecture allows users to add additional battery packs for extended runtime, which is essential in situations where power outages can disrupt business operations. Equipped with smart features, it includes an LCD control panel that provides real-time information regarding battery status, load level, and other vital metrics, enabling users to monitor performance effortlessly.

Another significant characteristic of the SU16000RT4UHW is its compatibility with Tripp Lite's PowerAlert software. This software allows for advanced management of power conditions and remote monitoring via SNMP interface when paired with the optional SNMP/Web card. The UPS also includes a variety of outlets, including both NEMA and IEC standard configurations, catering to different equipment and ensuring adaptability.

Furthermore, this UPS is designed with enhanced protection features such as spike and surge suppression, which safeguards connected devices from electrical disturbances. The internal smart charging system also maximizes battery life by optimizing charging cycles based on usage patterns. This means that users can expect higher availability and a longer operational lifespan.

Constructed with durability in mind, Tripp Lite has included a fault-tolerant design that ensures uninterrupted power delivery even under extreme conditions. The SU16000RT4UHW's robust thermal management enhances cooling efficiency, contributing to reliable operation even in densely populated rack environments.

In conclusion, the Tripp Lite SU16000RT4UHW and its counterpart the SU16000RT4U are essential components for any organization that prioritizes reliable power management. With its high capacity, advanced features, and flexible configurations, it provides unmatched protection for critical IT equipment, ensuring business continuity in the face of electrical failures. Investing in such technology not only protects hardware but also secures data integrity and operational efficiency.
Top Page Image Contents