Basic Operation continued
External Battery Setting Control
Tap the MODE button repeatedly to advance to the External Battery display, as shown here:
EXTERNAL BATTERY
EXTERNAL BATTERY
Press the MUTE button to advance to the next available option. The last option displayed, before navigating away from this menu option, will be the selected setting.
Note: The Battery Runtime calculation is based on this setting.
This feature setting allows the user to configure the UPS for use with an External Battery Pack or without an External Battery Pack. The Runtime will be automatically reconfigured.
NOTE: Battery Packs cannot be daisychained. Only one Battery Pack can be attached to the UPS.
Error Messages
In the event that the UPS battery requires replacement, the 
icon will flash, as well as
the 
icon. If there is an overload, the 
, 
, and 
icons will flash simultaneously along with a numeric read out of the load percentage.
7
201103012 933072.indb 7 | 3/8/2011 1:43:11 PM |