Tripp Lite B007-008 owner manual Factory Default Settings

200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 12

OSD Overview

The settings are explained in the table below:

Setting	Function
Channel Display	Selects how the Port ID is displayed. There are three choices: Number plus the
Mode	Name (PN + NAME), Number alone (PN) or Name alone (NAME).
Channel Display	Determines how long a Port ID is displayed. There are two choices: 3 seconds
Duration	and always on.
Channel Display	Allows you to position the Port ID on the screen. After you highlight this item
Position	and press [Enter], the menu disappears and the port ID is displayed. Use the
	arrow keys, Pg Up, Pg Dn, Home and 5 (on the numeric pad with the Num Lock
	off) to position the port ID display then press [Enter] to lock the position and
	return to the Set Submenu.
Scan Duration	Determines how long the display dwells on each Port when it cycles through the
	selected Ports in the Quick View Scan Mode. The available options are: 3, 5,10,
	15, 20, 30, 40 and 60 seconds.
OSD Activating	Selects which Hotkey combination will activate the OSD function: [Ctrl] [Ctrl]
Hotkey	or [Scroll Lock] [Scroll Lock]. The default is the Ctrl key combination, but this
	may conflict with programs running on the computers, in which case, the Scroll
	Lock option should be selected.
Set Password	Allows you to set a password in order to control access to Locking/Unlocking
	the Console (see the OSD Security Features section, below, for details).
Clear Name List*	Clears all the Port Names from the Name List. You will be asked to Confirm
	before the procedure takes place. A message will be displayed while the Names
	are being cleared. Once the Names have been cleared, a message will appear
	indicating that the procedure was completed successfully.
Restore Default	Clears all the Settings from the memory and returns the unit to the factory
Values*	settings. You will be asked to Confirm before the procedure takes place. A
	message will be displayed while the Settings are being cleared. Once the
	Settings have been cleared, a message will appear indicating that the procedure
	was completed successfully.
Lock Console*	Locks / Unlocks the Console. When the Console is locked, only the current
	monitor screen displays. Attempts to input information from the console have
	no effect; attempts to switch to a different port, either from the Console or by
	pressing the manual switches, have no effect either. The only way to regain
	access to the computers is by Unlocking the Console. If a password has been
	set, you must provide the password in order to Lock / Unlock the Console. If no
	password has been set, pressing [Enter] will Lock / Unlock the Console.

*If a password has been set, these settings require you to supply a proper password in order to access them. See the OSD Security section, below, for details.

Factory Default Settings:

The factory default settings are as follows:

Setting	Default
Display Duration	Always On
Display Mode	The Port Number plus the Port Name
Scan Duration	3 Seconds

12