Schneider Electric TSXCUSBMBP Rescan Adapters, Show Interface, How to rescan?, If the icon

Establishing a Connection

Rescan Adapters

Introduction	If the TSXCUSBMBP device was not connected to the PC when the TSXCUSBMBP
	Driver started up, it will be necessary to rescan for a connected TSXCUSBMBP adapter
	before the driver will detect its presence. A red icon in the system tray will indicate this.
How to rescan?
	To rescan, right click on the icon in the system tray and select Rescan Adapters. The
	driver should then find the TSXCUSBMBP, and the icon will turn yellow for several
	seconds while the TSXCUSBMBP initializes and listens to the Modbus Plus
	network. It will then go to normal operation.
If the icon
	If the icon in the tray remains red following a rescan, check your USB connection and
remains red...	make sure the appropriate USB drivers are installed and enabled on your computer.

Show Interface

Introduction	As long as the TSXCUSBMBP driver is running, the driver Interface Window can be
	displayed to show driver configuration and connection information. It does not matter
	if the TSXCUSBMBP driver has established a connection with the TSXCUSBMBP
	device or not (the color of the icon in the system tray does not matter).
How to display
	To display the Interface Window, right click on the icon in the tray and select
the Interface	Show Interface.
Window?

20 35011984 02/2006