Schneider Electric TSXCUSBMBP Entering Routing Paths into the Routing Table, Step Action

Page 31

Configuring the TSXCUSBMBP Driver

Entering Routing Paths into the Routing Table

Use the following procedure to change an entry in the Routing Table:

Step Action

1Select Routing from the top level menu on the TSXCUSBMBP Driver Interface window.

2Select the entry to be changed in the table by left clicking on it (the entry will become highlighted)

3Enter the Modbus ID and the associated Modbus Plus Routing Path in the fields below the table.

4Click on the Update button to update that entry in the table. You will see the entry in the table above change to the new values.

5Repeat steps 2-4 for each entry to change in the Routing table.

Note: Clicking on the Close button will save all Routing Table entries and return to the top level menu. The new Routing Table will take effect immediately.

35011984 02/2006

31

Image 31

Contents

Tsxcusbmbp Page Table of Contents Appendix a Tsxcusbmbp Settings for Unity Connecting to a Modbus Plus NetworkUsing the Tsxcusbmbp with an Application Modbus Plus Network Diagnostic FunctionsImportant Information Safety InformationSchneider Electric. All Rights Reserved At a Glance About the BookAbout the Book Introduction Glossary Abbreviations Acronyms Glossary of Abbreviations AcronymsAbbreviation/Acronym Expansion Abbreviations & Acronyms Subject of this chapter Whats in this Chapter? OverviewTopic Port VSP Modbus Plus Communication for ApplicationsIntroduction Virtual SerialTsxcusbmbp Hardware Modbus Plus Network DiagnosticsDescription Overview Subject of this InstallationChapter? Upgrading From Previous Version Installation RequirementsInstalling the Tsxcusbmbp Hardware Installing the Tsxcusbmbp Driver SoftwareIntroduction How to install Tsxcusbmbp Driver? How to install Tsxcusbmbp Hardware Icon Color Status of the driver Establishing a Connection toStatus DriverIf the icon How to rescan?Rescan Adapters Show InterfaceConfiguring the Tsxcusbmbp Driver Select Show Interface Tsxcusbmbp Driver Interface WindowInterface Window DisplayAddress Configuring the Modbus Plus Node AddressAddress Changing Process Timeout Configuring the Slave Response TimeoutSlave Response Configuration Configured as follows Assignment Configuring the Virtual Serial COM PortThen Methods Configuring the Modbus Plus RoutingConfiguring Addressing Direct Explicit Implicit Node Used by Routing Table Address Application Entry Routing Example Routing exampleModbus + Slave ID Modbus Plus Routing PathTsxcusbmbp Entering Routing Paths into the Routing Table Configuring the Tsxcusbmbp Driver LED Flash Code Description Connecting to a Modbus Plus NetworkModbus Plus Network Status Indicator Flash CodesConnecting to a Modbus Plus Network Tsxcusbmbp with an Application Whats in this Chapter? Using the Tsxcusbmbp with an ApplicationStart the Tsxcusbmbp Driver Introduction Typical Configuration Configure the Application SoftwareConnect Using the Tsxcusbmbp with an Application Section Topic Modbus Plus Network Diagnostic FunctionsModbus Plus Network Diagnostic Functions Procedure for Starting the Diagnostic Functions Starting the Diagnostic FunctionsScanning the Modbus Plus Network Procedure for Scanning the Modbus Plus NetworkScanning Local or Complete Network Introduction Whats in this Section? Displaying Diagnostic InformationModbus Plus Network Diagnostics screen Procedure for Displaying Diagnostic InformationResults ProcedureNode Error Statistics Screennode Node PersonalityTransactions Selected node Screen Internal Path TransactionsNode Token Screen Green when active and gray when inactiveToken Owner Work Table Map screen. This section describes this screenActive Station Table Token Station Table Present Table Global Data Present TableGlobal Data Read Global DataModbus Plus Network Diagnostic Functions Introduction Whats in this Appendix? AppendicesAppendices Tsxcusbmbp Settings for Unity Tsxcusbmbp Settings for UnityThis situation from occurring Configuring Unity Make sure both drivers are running You should now be able to Connect Setting Tsxcusbmbp Settings for Concept & ProWORX32Tsxcusbmbp Configuring Concept ProWORX32Step Action