Q-Logic 2300 manual Tables 3-7and 3-8define the QLA2342/2342L specifications

￿	3 – QLA2342/2342L
	Specifications

14. Create an alias entry for the new boot device (optional). For example:

ok nvalias fibredisk /pci@1f,0/pci@1/QLGC,qla@4/sd@82,0

15.Set default boot device to be the new boot device (optional). For example: ok setenv boot-disk fibredisk

3.5

Specifications

Tables 3-7and 3-8define the QLA2342/2342L specifications.

Table 3-7. QLA2342/2342L HBA Operating Environment

Environment	Minimum	Maximum
Operating temperature	0° C/32° F	55° C/131° F
Storage temperature	-20 ° C/-4 ° F	70° C/158° F
Relative humidity (noncondensing)	10%	90%
Storage humidity (noncondensing)	5%	95%

	Table 3-8. QLA2342/2342L HBA Specifications
Type		Specification
Host bus	Conforms to PCI Local Bus Specification, revision 2.2 and the PCI-X
	Addendum, revision 1.0
PCI/PCI-X	3.3 V and 5.0 V buses supported
signaling
environment
PCI/PCI-X	132	MBps maximum burst rate for 32-bit PCI operation at 33 MHz
transfer rate	264	MBps maximum burst rate for 32-bit PCI/PCI-X operation at 66 MHz
	264	MBps maximum burst rate for 64-bit PCI operation at 33 MHz
	528	MBps maximum burst rate for 64-bit PCI/PCI-X operation at 66 MHz
	1GBps maximum burst rate for 64-bit PCI-X operation at 133 MHz
Fibre	Bus type: Multimode fibre optic media
Channel	Bus transfer rate: 200 MBps maximum at half-duplex
specifications		400 MBps maximum at full-duplex
	Interface chip: ISP2312
CPU	Single-chip design that includes a QLogic RISC processor, Fibre Channel
	protocol manager, PCI/PCI-X DMA controller, and integrated
	serializer/deserializer (SERDES) and electrical transceivers that can
	auto-negotiate a data rate of 1 Gbps or 2 Gbps
RAM	256	KB of sync SRAM supporting parity protection
BIOS ROM	128	KB of flash ROM in two 64-KB, software selectable banks. The flash
	is field programmable.

FC2354601-00 A 3-19