6 – Windows 2000 Driver | Installation | ||
| Windows 2000 | Installation | |
|
|
|
|
|
|
|
|
9.Click Finish.
10.Remove the disk that contains the QLogic driver from the drive, then click Yes to restart the system.
6.3.3
Updating the Windows 2000 Driver
Perform the following steps if a Windows 2000 driver is already installed and you want to install an updated version of the driver.
NOTE: The latest versions of the software drivers and documentation are available on the QLogic Web site, http://www.qlogic.com.
1.Click the Start button, point to Programs, point to Administrative Tools, point to Computer Management, and then click Device Manager.
2.
3.
4.The Upgrade Device Driver Wizard dialog box displays. Click Next.
5.Select Display a list of the known device drivers for this device so that I can choose a specific driver. Click Next.
6.Click Have Disk. The Install From Disk dialog box displays.
7.Insert the disk that contains the QLogic driver in an appropriate drive, then type the location of the Windows 2000 driver. For example:
A:\W2k
8.Click OK.
9.Select QLogic QLA23xx PCI Fibre Channel Adapter, then click Next. Windows 2000 indicates that the wizard is ready to install the device.
10.Click Next.
11.If the Digital Signature Not Found dialog box displays, click Yes.
12.Click Finish.
13.Remove the disk that contains the QLogic driver from the drive, then click Yes to restart the system.
|