Q-Logic 2300 manual Press Enter to accept the default

	10 – Solaris SPARC Driver Installation
￿	Installing the Solaris SPARC Driver from the
		QLogic Web Site

9.You are prompted to select the directory where the driver will be installed. For example:

Processing package instance <QLA2300-3> from </qla2300>

QLogic QLA2300 driver (sparc) Solaris 8-9, Rev=X.XX

Copyright (c) 1996-2002, by QLogic Corporation. All rights reserved.

Where do you want the driver object installed (default=/kernel/drv):

10.Press ENTER to accept the default.

11.The pkgadd program performs a series of checks, then posts a script warning and asks whether to continue the installation. For example:

##Executing checkinstll script.

Using </> as the package base directory.

##Processing package information.

##Processing system information.

##Verifying disk space requirements.

##Checking for conflicts with packages already installed.

##Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user permission during the process of installing this package.

Do you want to continue with the installation of <QLA2300-3> [y,n,?]

12.Type y and press ENTER to continue the driver installation. The pkgadd program notifies you when the driver installation is complete. For example:

Installing QLogic QLA2300 driver as <QLA2300-3>

##Installing part 1 of 1. /kernel/drv/qla2300 /kernel/drv/qla2300.conf

[ verifying class <none> ]

##Executing postinstall script

Installation of <QLA2300-3> was successful.

13.Type the following text to restart and reconfigure the system: reboot ---r

FC2354601-00 A 10-3