6 – Windows 2000 Driver Installation | |
QL2x00IP NDIS Network Driver Installation |
6.5.1
Initial Installation of the QL2x00IP NDIS Network Driver
Perform the following steps to install the QL2x00IP NDIS network driver:
1.Click the Start button, point to Settings, then click Control Panel.
2.
3.The Add/Remove Hardware Wizard welcome screen displays. Click Next.
4.In the Choose a Hardware Task dialog box, click Add/Troubleshoot a device and click Next.
5.In the Choose a Hardware Device dialog box, select Add a new device and click Next.
6.In the Find New Hardware dialog box, click No, I want to select the hardware from a list and click Next.
7.In the Hardware Type dialog box, select Network Adapters and click Next.
8.Insert the disk that contains the QLogic driver in an appropriate drive.
9.In the Select Network Adapter dialog box, click Have Disk.
10.Type the path to the QL2x00IP NDIS network driver. For example:
A:\W2k\Ip
11.Click OK.
12.In the Network Adapter list, click QLogic QLA2X00 PCI Adapter, then click Next.
13.In the Start Hardware Installation dialog box, click Next to install the driver.
14.If the Digital Signature Not Found dialog box displays, click Yes.
15.In the Add/Remove Hardware Wizard dialog box, click Finish to complete the driver installation.
16.Modify the IP address parameters and driver parameters. See section 6.5.3 for details.
6.5.2
Updating the QL2x00IP NDIS Network Driver
Perform the following steps if a QL2x00IP NDIS network driver is already installed and you want to install an updated version of the driver:
1.Open a DOS command prompt window.
2.Change the current directory to the Windows 2000 driver directory. For example:
cd \Winnt\System32\Drivers
|