6 – Windows 2000 | Driver Installation | ||
QL2x00IP NDIS Network | Driver Installation | ||
|
|
|
|
|
|
|
|
8.In the QLogic QLA2X00 PCI Adapter #n Properties dialog box, click the Advanced tab.
9.The Property list displays the configuration parameters. Click the parameter that you want to modify. The values display to the right.
10.Make configuration parameter modifications as necessary, then click OK.
11.In the Local Area Connection n Properties dialog box, click OK.
12.Restart the computer.
6.5.4
Removing the QL2x00IP NDIS Driver
If you need to remove the QLA2x00IP NDIS driver, perform the following steps:
1.Click the Start button, point to Settings, and then click Control Panel.
2.
3.The Add/Remove Hardware Wizard welcome screen displays. Click Next.
4.In the Choose a Hardware Task dialog box, click Uninstall/Unplug a device and click Next.
5.In the Choose a Removal Task dialog box, click Uninstall a device and click Next.
6.From the Device list, click the appropriate QLA23xx HBA. Click Next.
7.Click Yes, I want to uninstall this device. Click Next.
8.In the Add/Remove Hardware Wizard dialog box, click Finish to complete the removal of the driver.
|