Sun Microsystems EC000066 manual Installing VTL Value hardware

C H A PT E R 1

Installing VTL Value hardware

This chapter describes the process of physically installing the VTL Value appliance and applying power. The tasks break down as follows:

This chapter contains procedures for:

■

■

■

“Installing the VTL Value appliance in an equipment rack” on page 1 (if a rack is used) “Cabling” on page 16

“Starting the VTL appliance” on page 22.

Installing the VTL Value appliance in an equipment rack

To safely install the VTL Value appliance in an equipment rack, you need to carry out the following tasks:

■“Preparing for the job” on page 1

■“Installing slide-rail assemblies” on page 3

■“Mounting the appliance in the rack” on page 13

Preparing for the job

Before you start the assembly and installation process, you must assess the compatibility of the selected rack and gather the necessary personnel, tools, and materials. Proceed as follows.

316196101 • A 1