Installing the cable management arm | 16 | |
▼ Attaching the Outer Rail Extension | 17 | |
Routing and connecting cables | 20 | |
▼ Installing data and power cables | 20 | |
Starting the VTL appliance | 22 | |
▼ | Powering up | 22 |
▼ | Powering down | 24 |
2. Setting up the VTL Value ILOM service processor | 25 | |
Understanding the ILOM | 25 | |
Changing the IP address of the ILOM SP | 26 | |
▼ Attaching a laptop to the ILOM via the VTL private network | 26 | |
▼ Changing the IP address of the ILOM | 28 | |
Changing the ILOM password | 29 | |
▼ Resetting the default ILOM password | 29 | |
Checking the health of the internal storage systems | 30 | |
▼ Accessing the Solaris desk top via the ILOM | 31 | |
▼ Running basic storage diagnostics | 33 | |
Changing the Solaris root password | 35 | |
▼ Changing the default Solaris root password | 36 | |
Logging out | 36 | |
▼ Logging out of the operating system and ILOM | 36 | |
A. The back and front panels of the VTL Value server | 39 | |
B. VTL private network addresses | 41 | |
C. Connecting to ILOM via a serial port | 43 | |
D. ILOM command reference | 45 |
vi VTL Value Hardware Installation Guide • Aug 2007