Network Technologies ST-xU operation manual Format RU Aacr

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH

CA - change all output channels

FORMAT:	CA AA,XX<CR>
	CA = "change all outputs" command followed by at least one space
	AA = unit address
	XX = input /CPU to connect to all outputs/USERS
RESPONSE:	*<CR> (command received and executed OK)
	?<CR> (syntax or transmission error occurred)

FYI: In this NODEMUX switch, this command will have the same effect as the CS command above.

RO - read single USER channel

FORMAT:	RO AA,YY<CR>
	RO = "read output" command followed by at least one space
	AA = unit address
	YY = output/USER to read
RESPONSE:	*<CR> (command received and executed OK)
	XX<CR> (XX = input/CPU connected)
	-OR-

	?<CR> (syntax or transmission error occurred)
RU - read unit size
FORMAT:	RU AA<CR>
	RU = "read unit size" command followed by at least one space
	AA = unit address
RESPONSE:	*<CR> (command received and executed OK)
	XX,YY<CR> (XX = # of CPU’s, YY = # of USERS)
	-OR-
	?<CR> (syntax or transmission error occurred)
RV- read unit software version
FORMAT:	RV XX,00

RV= "read software version" command followed by at least one space AA= unit address

00= command for the address location in memory of the software version

RESPONSE:

-OR-

?<CR> (syntax or transmission error occurred)

CF - reset all connected units, regardless of address, to factory default configuration settings

WARNING: THIS COMMAND WILL RESET ALL RS232 DAISY CHAIN CONNECTED NODEMUX SWITCHES TO FACTORY DEFAULT SETTINGS. IF OTHER SWITCHES ARE DAISY CHAINED VIA RS232, DISCONNECT THEM BEFORE SENDING THIS COMMAND.

FORMAT: CF 00

RESPONSE: (After 10-20 seconds)

COMMAND OK

RESET SWITCH CONFIGURATION IS COMPLETE

PLEASE RESET SWITCH POWER

FOR CHANGES TO TAKE EFFECT

31