Patton electronic 4830 manual Connecting to external power source

Page 41

SmartNode 4830 Getting Started Guide

3 • Hardware installation

 

 

Connecting to external power source

The VoIP IAD comes with an internal or external power supply. This section describes installing the power cord into the VoIP IAD. Do the following:

Note Do not connect the power cord to the power outlet at this time.

1.If your unit is equipped with an internal power supply, go to step 2. Otherwise, insert the barrel type con- nector end of the AC power cord into the external power supply connector (see figure 21).

2.Insert the female end of the power cord into the internal power supply connector (see figure 21).

DC power connector

Figure 21. Power connector location on rear panel

The VoIP IAD power supply automatically adjusts to accept an input voltage from 100 to 240 VAC (50/60 Hz).

CAUTION

Verify that the proper voltage is present before plugging the

power cord into the receptacle. Failure to do so could result in

 

 

equipment damage.

3.Verify that the AC power cord included with your VoIP IAD is compatible with local standards. If it is not, refer to chapter 6, “Contacting Patton for assistance” on page 56 to find out how to replace it with a com- patible power cord.

4.Connect the male end of the power cord to an appropriate power outlet.

Installing the VoIP IAD

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Analog VoIP Integrated Access Device Mailsupport@patton.com Summary Table of Contents Table of Contents LEDs status and monitoring Specifications SmartNode 4830 Series factory configuration List of Figures List of Tables Structure About this guideAudience Impaired functioning PrecautionsSafety when working with electricity General conventions Typographical conventions used in this documentGeneral observations SmartNode 4830 Getting Started GuideAbout this guide General information Chapter contentsSmartNode product SmartNode 4838 shown SmartNode Model 4830 Series OverviewGeneral information Examples of SN4830 Series rear panels FXS only SmartNode 4830 Series Detailed DescriptionModel SN4832/JOX*/EUI FXO ports DSL connector SmartNode 4830 Series power input connector Ports descriptions SmartNode 4830 Series front panels FXS only Console Applications overview Applications for SmartNode 4830 Series Multiservice carrier access over leased linesIntroduction Converged enterprise network over leased line Converged enterprise network over leased lineHardware installation Create a network diagram see section Network information on Planning the installationInstallation checklist IP related information Site logNetwork information Installing the VoIP IAD Analog FXS connection RJ-11 pinout diagram RJ-11 socket Installing the Ethernet cable Installing the serial WAN cable DCD Hardware installation Rear panel of SN4830 T1/E1 -/K Model Pins not listed are not used Connecting to external power source Power VoIP Link Getting started with the SmartNode Steps for setting up a new SmartNode Connect with the serial interface Power connection and default configurationConfigure IP address Changing the IP address LoginLoad configuration Connect the SmartNode to the networkStart Bootloader BootloaderLoad a new application image SmartWare via Tftp Start-up with factory configurationCopy tftp//tftpserveraddress/server path/b1 flash Load a new application image SmartWare via the serial link Additional informationLEDs status and monitoring Status LEDs LEDs status and monitoring SmartNode LED Indications Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information RMA numbers Out-of-warranty serviceAppendix a Compliance information Compliance Safety complianceRadio and TV Interference FCC Part EMC complianceIndustry Canada Notice FXO ports FCC Part 68 Acta Statement FXO portsAuthorized European Representative CE NoticeAppendix B Specifications Ethernet interface Voice connectivitySync serial interface if applicable T1/E1 interface if applicableShdsl Daughter Card if applicable Adsl Daughter Card if applicableVoice signaling Voice processing signaling dependentPPP and Frame-Relay support Fax and modem supportManagement IP servicesVoice routing-session product Weight and power dissipation DimensionsPower supply Operating environmentSmartNode Model SysObjectID Identification of the SmartNode devices via SnmpAppendix C Cabling Serial console Connecting a serial terminalEthernet straight-through Ethernet 10Base-T and 100Base-TAnalog FXS Connecting an FXS deviceAnalog FXO Connecting to an FXO line socketDSL T1/E1Appendix D Port pin-outs Ethernet 10Base-T and 100Base-T port Console portSerial port Sync Serial PortFXO port FXS portADSL/G.SHDSL port T1/E1 portAppendix E SmartNode 4830 Series factory configuration SmartNode 4830 Series factory configuration Appendix F Installation checklist Task Verified by Date Appendix G Accessories Description Part Number

4830 specifications

The Patton Electronics 4830 is a robust and versatile device designed for reliable communication in various networking environments. This product is a part of Patton's extensive portfolio, known for its quality, reliability, and innovative solutions in the telecommunications field. The 4830 model is primarily used for connecting Ethernet networks over long distances, leveraging advanced technologies to ensure optimal data transmission and connectivity.

One of the key features of the Patton 4830 is its support for both TDM (Time Division Multiplexing) and Ethernet over existing copper or fiber infrastructure. This functionality allows users to maintain legacy connections while upgrading their networks, providing a seamless transition to modern digital communications. The device supports multiple interfaces, including Ethernet, serial, and analog, making it suitable for diverse applications ranging from industrial automation to enterprise networking.

The 4830 is equipped with Patton’s SmartLink technology, which enhances performance by automatically optimizing the link conditions. This proprietary technology enables the device to adapt to varying network conditions, ensuring minimal downtime and maintaining high data integrity. Furthermore, the 4830 features built-in redundancy capabilities, ensuring that critical communications remain uninterrupted even in the event of a failure.

In terms of physical characteristics, the Patton 4830 is designed for rugged environments, featuring a compact form factor that allows for easy deployment in various settings. The device comes with LED indicators for power, status, and connectivity, providing real-time feedback to users. It can be mounted on a rack or installed on a desktop, making it a flexible option for different installation scenarios.

Another significant characteristic is its security features, which include firewall protections and encryption options to safeguard data against unauthorized access. This is particularly important for businesses that handle sensitive information and require compliance with data protection regulations.

With its combination of advanced functionalities, interoperability, and robust design, the Patton Electronics 4830 stands out as a reliable choice for organizations looking to enhance their communication capabilities while securing their network investments. As technology continues to evolve, the versatility of the 4830 ensures that it remains a relevant and effective solution for years to come. In summary, the Patton 4830 is an exemplary device that encapsulates the brand’s commitment to quality and innovation in telecommunications.
Top Page Image Contents