ZyXEL Communications user manual Prestige 100WH Back Panel, WAN Port Status LEDs

Prestige 100WH Internet Access Router

1.4.3WAN Port Status LEDs

CD (Carrier Detect) signal is sent by the WAN device to indicate that line negotiation is successful and that it is ready for data transfer.

RTS (Request to Send) and CTS (Clear to Send) are hardware flow control signals. RTS is from the DTE (the Prestige) while CTS is from the DCE (the WAN device).

1.5Prestige 100WH Back Panel

The following figure helps you identify the rear panel ports of your Prestige 100WH. Refer to this diagram when attempting to make connections.

1:POWER = Input power connector to the AC adapter.

2:ETHERNET = 4 x RJ-45 ETHERNET 10Base-T ports.

3:CONSOLE = DB-9 (female) Console port.

4:WAN = DB-25 (male) WAN port.

1 2 3 4

ETHERNET

POWER 4 3 2 1 CONSOLE WAN

Figure 1-2. Prestige 100WH Back Panel

1-6Chapter 1 Getting to Know Your Internet Access Router