ZyXEL Communications 100WH user manual 4Chapter 4 Remote Node Configuration

Prestige 100WH Internet Access Router

Table 4-1.	Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field		Description
Incoming:	Call Back	This field will be valid only if [Call Direction] is [Both]. Otherwise, an
		[N/A] appears in the field.
		This field determines whether or not your Prestige will call back after
		receiving a call from this remote node.
		If this option is enabled, your Prestige will disconnect the initial call
		from this node and call it back at the Outgoing Primary Phone
		Number (see below).
Outgoing:	My Login	This is a required field if [Call Direction] is either [Both] or [Outgoing].
	Name	Enter the login name when calling this remote node.
Outgoing:	My	This is a required field if [Call Direction] is either [Both] or [Outgoing].
	Password	Enter the password for your Prestige when it calls this remote node.
Outgoing:	Authen	This field sets the authentication protocol allowable when the
		Prestige calls this remote node.
		Options for this field are:
		• CHAP/PAP - Your Prestige will agree to either CHAP or PAP
		when requested by the remote node.
		• CHAP – Use CHAP only
		• PAP – Use PAP only.
Outgoing:	Pri(mary)	Both the Primary Phone number and the Secondary Phone number
	Sec(ondary)	refer to the number that your Prestige will dial to connect to the
	Phone	remote node. Your Prestige will always call the remote node using
	Numbers	the Primary Phone number first.
		If the Primary Phone number is busy or does not answer, your
		Prestige will call the Secondary Phone number if available.
		Some areas require dialing the pound sign # before the phone
		number for local calls. A # symbol may be included at the beginning
		of the phone numbers.

4-4Chapter 4 Remote Node Configuration